Cleaner Dispatch
Key takeaways
- Put access, scope, supplies, and timing in one brief instead of four messages.
- Ask the cleaner to confirm the job before the dispatch is treated as covered.
- Name the on-site decision maker and the backup contact.
- Close the job with photos and a note about anything left unfinished.
Operating data
Playbook
Put the whole job in one brief
A cleaner dispatch brief is the difference between a job that starts on time and a series of messages at the door. Put the address, the access method, the scope, the supplies, and the guest's schedule in one message. The cleaner should not have to open four threads to learn what the unit needs. A single brief also gives the coordinator one place to correct a detail. Send it in the same format every time so the cleaner can scan it quickly.
Start with access because it is the most common reason a dispatch fails. State the lockbox location, the code, the parking rule, and whether the building requires a key at the desk. If the code changes, send the new one before the cleaner leaves, not after they arrive. Ask the cleaner to confirm that the code worked. A brief that omits access is only a description of a job, not a dispatch.
Write the scope and the supply list
Describe the scope in rooms and tasks rather than in adjectives. Say that the unit has two bedrooms, one bathroom, a kitchen, and a balcony, and name the tasks that are easy to miss. A request to make the place spotless leaves the cleaner to guess what matters. Include the linen count and the number of towel sets the unit uses. The cleaner should know what done looks like before opening the door.
Name the supplies the cleaner must bring and the ones the unit already holds. A missing mop or a wrong vacuum filter can turn a two-hour job into a wasted trip. If the unit has a specific product for a stone counter or a wood floor, say so in the brief. A cleaner who uses the wrong product can cause damage that costs more than the visit. The supply list should match the property record, not a generic cart.
Put the guest schedule in the brief
Put the guest's schedule in the brief, including the checkout time and the next arrival. If the turn is back-to-back, say how much buffer exists and who decides whether the unit is ready. A cleaner who knows the next guest arrives at four will pace the work differently. A cleaner who is told only to clean the unit may leave at noon and report a problem at three. The schedule is part of the job, not context.
Ask the cleaner to confirm the job before the dispatch is treated as covered. A one-word reply with the arrival time is enough. If the cleaner does not confirm within the stated window, the coordinator should call rather than assume. An unconfirmed dispatch is an open risk, especially on a weekend. Record the confirmation time beside the job so the next shift can see it.
Name the decision maker
Name the on-site decision maker and the backup contact in the brief. The cleaner may find a broken fixture, a pet, or a guest who has not left, and the response should not depend on reaching the owner. Give the cleaner a rule for each common case, such as photograph and call, clean around, or stop and wait. The decision maker should be someone who can authorize a repair or a delay. A name and a number are more useful than a general instruction to escalate.
Set a check-in time for long or complex jobs. A move-out clean with a repair or a deep carpet task can drift past the estimate. A mid-job message lets the coordinator adjust the next arrival or send a second person. The check-in should be brief and focused on time, not on a progress report. A five-minute update can save an hour of guest frustration.
Close with photos and a note
Close the job with photos and a note about anything left unfinished. The photos should show the rooms in their standard arrangement and any area that needs a follow-up. The note should name the supply that ran low, the item that broke, and the task that could not be completed. A closeout that says only that the job is done hides the next problem. The coordinator should review the closeout before releasing the unit.
Review dispatch failures monthly and look for the field that was missing. A run of access problems points to the brief, while a run of supply problems points to the staging routine. A run of late finishes points to the scope or the buffer. Fix the template rather than blaming the cleaner for a gap the template created. A brief that improves after each failure is the cheapest training the team can build.
Keep the brief current as properties change
A dispatch brief goes stale when a lock is replaced, a vendor changes, or a room is refurnished. Review the brief whenever the property record changes, and ask the cleaner whether anything in it no longer matches the unit. The person at the door sees the change first. A brief that is updated only after a failed job is always one job behind.
Keep one template for every property and vary only the fields that truly differ. The cleaner should be able to find access, scope, supplies, and timing in the same order every time. When a new property joins the portfolio, fill the template before the first dispatch rather than sending a rushed message. Consistency at the template level is what makes an unusual job easy to spot.
## Related services - Turnover coordination - Property documentation - Guest communication
## Sources - CDC hygiene guidance
FAQ
When should a leader delegate this workflow?
Delegate it when repeated coordination, routing, or follow-up is taking time away from decisions that only the leader can make.
What should the assistant own first?
Start with intake rules, status visibility, and escalation timing so the assistant can act consistently before the workflow expands.
